Articles
  • The Application of Pressure Sensor in Injection Mold
    Posted: 06/13/2016 03:59:44  Hits: 22
    Under current competitive environment, mold manufacturers should not only can make mold, but also can figure out various problems came up with by customers, such as shrinkage, mold temperature, heating temperature ate and other methods of demolding. With the application of pressure sensor, mold manu...
  • Plastic Mold Development Tendencies
    Posted: 05/04/2016 05:28:49  Hits: 61
    At present, current development features of the whole industrial production are various categories, rapid updating and drastic market competition. To meet customers' requirements for mold manufacturing with short date of delivery, high precision and low cost, plastic mold must have following dev...
  • Conformal Cooling Plastic Injection Mold
    Posted: 04/06/2016 04:57:28  Hits: 68
    Plastic injection mold can make plastic products in daily life acquire complicated shapes and details. Under the circumstance that maintains stable tolerance zone and high surface quality of products, plastic injection mold realizes mass production.  For mold manufacturers, the quality of mold...
  • Technological Processes of Plastic Injection Molding
    Posted: 03/21/2016 03:54:20  Hits: 78
    Technological processes of plastic injection molding mainly include filling, pressurization, cooling and demolding. The four steps are a complete continuous process. 1. Filling Filling is the first step of the whole injection molding. Time should be originated from mold closing to filling about 95%...
  • Six Categories of Plastic Mold
    Posted: 03/14/2016 05:26:31  Hits: 81
    Plastic mold is assorted with plastic forming machines in plastic processing industry, making plastic products with complete configuration and precise dimension. Based on different forming methods, plastic mold can be classified into several categories to meet different requirements of techniques, m...
  • Seven Constituent Parts of Injection Mold
    Posted: 02/29/2016 04:15:20  Hits: 72
    According to using functions, basic structure of injection mold can be divided into molding part, gating system, guide mechanism, ejection device, side parting and core pulling structure, cooling and heating system and exhaust system, the seven parts. 1. Molding part Molding part refers to the comp...
  • Chromeplate Used for Large Mould of Auto
    Posted: 02/17/2016 05:18:12  Hits: 75
    With auto industry developing, stamping materials used for auto industry are constantly developing into high strength and lightweight. Therefore, it comes up with new challenge to the mould of auto. As a kind of metals having high strength, chrome has already been applied in electroplating of larg...
  • Working Conditions of Plastic Mold
    Posted: 01/12/2016 04:59:58  Hits: 104
    According to performance of raw materials and forming methods, plastic mold can be classified into mold for thermosets and mold for thermoplastics.  Mold for thermosets is mainly used for compressing, transferring and plastic injection molding components, including compression mold, transferri...
  • Basic Resins Used for Plastic Injection Molding
    Posted: 12/14/2015 03:43:56  Hits: 127
    Basic resins used for plastic injection molding are classified into commodity resin and engineering resin. Commodity resin is a kind of inexpensive resins which are easy to be processed. Commodity resin has been widely applied, including toys, packaging and consumer products. Compared with commod...
Contact & Follow
No.1 Building First Floor, Jomo Technology Park, Gangsheng Road, Shajing Town, Bao,an District, Shenzhen, China
+86 0755-29615874

Tags|FAQ|Links To Us|Privacy Policy|Site Map|Top