15
2020.12
The Effects Of Injection Molding Temperature On The Molded Parts | Moldplasticinjection
The Effects Of Injection Molding Temperature On The Molded Parts | Moldplasticinjection In injection molding, a variety of different injection molding processes are often used to meet the injection requirements of different products. Temperature is one of the most basic control parameters in plastic injection molding. Today, we’ll be talking about the influence of mold te......
12
2020.12
Size Matching Of Injection Machine And Mold – How To Calculate Size In An Injection Machine & Mold
Size Matching Of Injection Machine And Mold - How To Calculate Size In An Injection Machine & Mold In order to ensure a good match between the designed mold and the injection machine, please check the relevant data between them, and then design the mold and select the injection machine model. The verification aspects include:1. Injection amount and injection pressure2......
28
2020.11
6 Tips On Controlling The Color Difference Of Plastic Injection Molding Products
6 Tips On Controlling The Color Difference Of Plastic Injection Molding Products In some plastic injection molding products, there are many factors affecting color difference, including raw resin, masterbatch, mixing of masterbatch and raw material, injection molding process, injection molding machine, etc. Here in this article, we share some tips on controlling the color......
27
2020.11
Liquid Silicone Rubber Injection Molding Process From Start To Finish
Liquid Silicone Rubber Injection Molding Process From Start To Finish The injection molding of liquid silicone rubber is a new technology rising in rubber processing in recent years. The characteristic of this process is that it can produce silicone rubber products at high speed. Here in this article, we overview the introduction to liquid silicone rubber injection moldin......
25
2020.11
What Causes Flash In Injection Molding & How To Fix Them | Moldplasticinjection
What Causes Flash In Injection Molding & How To Fix Them | Moldplasticinjection Flash is one of the most common defects in the injection molding industry. In the production of injection molded parts, the first process after demolding is to manually scrape off the flash, which will undoubtedly reduce the productivity and directly affect the appearance quality of the pl......