How To Make Carbon Fiber Molds & Parts | Mold Making For Carbon Fiber

Due to the particularity of carbon fiber material, it is usually hard and light, it can be injection moulded. The carbon fiber mold is applicable to the process and products with carbon fiber as raw material and solid plastic resin. It’s widely used in aircraft, high-end automobile and other fields. Although carbon fiber products are expensive, you only need to make a high-quality carbon fiber mold and you can mass produce carbon fiber parts. This article covers a......

Analysis Of ABS Plastic Injection Molding Process | Injection Molding For ABS

ABS Injection Molding is a great choice for manufacturing plastic products because ABS (Acrylonitrile Butadiene Styrene) as the common thermoplastic polymer has large mechanical strength and good comprehensive performance, it occupies an important position in the electronic industry, mechanical industry, transportation, building materials, toy manufacturing and other industries, especially for the slightly large box structure and load-bearing components, and the d......

5 Things To Consider In PEEK Injection Molding Process

PEEK resin was first applied in the field of Astronautics, replacing aluminum and other metal materials to manufacture various aircraft parts. Due to the good friction resistance and mechanical properties of PEEK resin in automobile industry, as the raw material for manufacturing the engine hood, the bearings, gaskets, seals, clutch gear rings and other components made of PEEK resin are widely used in the transmission, braking and air conditioning systems of autom......

PEEK Injection Molding: Properties, Characteristics And Applications

PEEK is a semi-crystalline polymer, a special engineering plastic with excellent comprehensive performance. It has a high melting point (343°C), excellent mechanical properties, and excellent biocompatibility. It is currently a popular research injection molding material. Here is a brief introduction of PEEK injection molding properties, characteristics and applications.  Properties & Characteristics Of PEEK Injection Molding● High temperature resistance: PEEK......

How To Prevent Plastic Injection Mold Shrinkage Fluctuation

Plastic injection molding must be based on the premise that the mold can be made according to the required size. However, even if the mold size is certain, the actual size of the product varies with the actual shrinkage. Therefore, in precision injection molding, the control of shrinkage rate is very important. Whether the injection mold design is suitable or not dominates the shrinkage rate depends on the different resin batches. If the pigment is changed, the ......